TotK Recomp 0.4.0 fixes climbing above 60 fps and uses about 1.4 GB less memory
totk.ini, and rebuilds the program and the shaders. You need your own dump. Overclocked does not host or link game files.Climbing and memory
- Climbing above 60 fps. Link climbs at full speed, stays on the top of ladders and reaches ledges. 30 and 60 fps are unchanged. On game 1.2.1, climbing at 60 is full speed too. If it misbehaves, turn off Climbing speed fix on the Mods tab, or set
climb_fix = 0under[frame rate]. - About 1.4 GB less memory over a long session, per the notes. On a 10-minute ride through Hyrule Field on an RX 9070, the game held 30 percent less VRAM (4.8 GB down to 3.4 GB) and 1.4 GB less system memory. Textures the game has finished with are kept up to 256 MB.
- A short out-of-memory moment frees what it can and retries for up to 30 seconds. The author could not reproduce these crashes on their own machines, so a remaining one still needs
logs/totk.log. - Integrated graphics, AMD APUs and Intel, convert Switch textures to BC3 by default. The notes say that is about 900 MB less memory and about 20 percent more fps on a Ryzen 7900X's integrated GPU.
- Handheld mode draws at the resolution you set. A 1280x720 handheld picture now renders 1280x720. It had been drawing a 1920x1080 scene into a texture budget sized for 720p, which could crash shrine entrances and the Temple of Time. Docked mode is unchanged. If you play handheld at 1920x1080, the game now really draws that, so it costs more GPU time.
Laptops, doors and a few settings
- The game asks NVIDIA Optimus and AMD switchable graphics for the dedicated GPU, opts out of Windows power throttling, and keeps the threads each frame waits on the performance cores of a 12th-generation or newer Intel CPU when it has at least four of them.
- Gear doors in the Riogok and Turakamik shrines and the Wind Temple open above 30 fps on game 1.2.1. The gears were turning and the door stayed shut.
- Dynamic resolution is now a setting. It stays on by default. Turn it off under Graphics to keep the scene at your render scale. On a high render scale and a 4K or wider screen, the scene can grow past 4096 pixels wide.
- Intel UHD and Iris Xe default two options off. The notes say that clears coloured noise on foliage and black patches over the scenery.
- Draws in a row that read different vertex streams bind fewer slots. The notes say that was 16 percent of the frame rate on an RTX 5060 Laptop.
Known issues in 0.4.0
- Laptops. Asking for the dedicated GPU can change which GPU is listed first, so a GPU you picked before may now be the integrated one. The installer can say shader prep failed, or the frame rate can drop. Delete the
gpu_indexline under[display]intotk.ini, or set GPU to Auto on the Screen tab, then run the installer again. - Game 1.2.1 with DLSS. The camera can look zoomed into the top-left corner. Turn DLSS off under Graphics until that is fixed.
- AMD, black screen or
VK_ERROR_DEVICE_LOST. Addvk_recorder = 0under[performance]. The GPU command recorder is now on for AMD as well as NVIDIA and Intel. - The notes say DLSS and the Linux build are tested by the community. The author does not have that hardware.
Downloads
Windows is TotK-Setup-0.4.0-windows.zip. Linux is TotK-Setup-x86_64-0.4.0-linux.AppImage. Get them from the 0.4.0 release. An optional sync_ahead = 1 line, off by default, builds the next frame while the GPU draws the previous one. The notes say that adds one frame of input delay, and on Windows the companion shadow = 1 line keeps a second copy of the game's memory, about 4.5 GB, so skip it with 16 GB of RAM or less. The port is listed in the ports directory.
Related on Overclocked
- PC Gaming Handhelds Guide 2026: Steam Deck, ROG Xbox Ally, Legion Go and More
- Android ports directory